Sharp MX-2630N User Manual page 499

FACSIMILE►OTHERS FUNCTION
5
AAA AAA
Address
0 pages of original
have been scanned.
Exposure
Send the scanned data?
Auto
Resolution
Super Fine
Original
Job Build
Slow Scan Mode
Mixed Size Orig.
Original Count
Others
reception memory
Tap the [OK] key to start transmission.
6
If this function is combined with [Job Build], the count result is displayed after the [Read-End] key has been tapped.
If the displayed number of original sheets is different from the actual number of sheets:
Tap the [Cancel] key and then tap the [OK] key in the message screen to clear all scanned data. Scan settings and
destination settings will not be cleared. Insert the original sheets in the document feeder tray again and tap the [Start]
key to re-scan.
Sending History
(Pg.No.1)
Call Search Number
Direct TX
Verification Stamp
Call Program
Call Registered settings
Send Same Image
Cancel OK
as Fax Address
Preview
Scan Size Send Size
100%
Auto Auto
Start
A4 A4
100%
When scanning is completed, check
the number of original sheets.
The number that is displayed is the number of scanned
original sheets, not the number of scanned original pages.
For example, when 2-sided copying is performed using one
original, the number "1" will appear to indicate that one
CA
original sheet was scanned, not "2" to indicate the front-side
page and the reverse side page.
4-92