Peripheral Devices - Sharp MX-2630N User Manual

BEFORE USING THE MACHINE►PERIPHERAL DEVICES

PERIPHERAL DEVICES

PERIPHERAL DEVICES
Peripheral devices can be installed on the machine to increase its range of functionality.
The peripheral devices are generally optional. However, some models include certain peripheral devices as standard
equipment.
(As of April, 2016)
Product name
Stand/550 sheet paper drawer
Low stand/550 sheet paper drawer
Stand/2x550 sheet paper drawer
Stand/3x550 sheet paper drawer
Stand/550&2100 sheet paper drawer
Large capacity tray
Long paper feeding tray
Exit tray unit
Exit tray cabinet
Job separator tray
Inner finisher
Finisher
Finisher (large stacker)
Saddle stitch finisher
Saddle stitch finisher (large stacker)
Paper pass unit
Punch module
Product
number
MX-DE25 N Additional tray. A maximum of 550 sheets of paper can be loaded
into the tray.
MX-DE29 N
MX-DE26 N Additional tray. A maximum of 550 sheets of paper can be loaded
into each tray.
MX-DE27 N
MX-DE28 N Additional tray. The maximum number of sheets that can be
loaded is 550 sheets in tray 2, 1200 sheets in tray 3, and 900
sheets in tray 4.
MX-LC17 N Additional tray. A maximum of 3000 sheets of paper can be
loaded into the tray.
MX-LT10 When using long paper, the long paper is loaded in the bypass
tray.
MX-TR19 N When a finisher is installed, this can be added to the right side of
the machine.
MX-TU16 This enables separation of output locations by mode (copy,
printer, etc.).
MX-TR20
MX-FN27 N Output device that enables the use of the staple function and
offset function.
MX-FN28 Output device that enables the use of the staple function and
offset function. To install the finisher, a stand/550, stand/2x550,
MX-FN30
stand/3x550, or 550&2100 sheet paper drawer is required.
MX-FN29 Output device that enables use of the staple function, offset
function and booklet function. To install the finisher, a stand/550,
MX-FN31
stand/2x550, stand/3x550, or 550&2100 sheet paper drawer is
required.
MX-RB25 N This unit is required to install a finisher or a saddle stitch finisher.
MX-PN14A This unit punches holes in copies and other output. An inner
MX-PN14B finisher (MX-FN27 N) is required.
MX-PN14C
MX-PN14D
MX-PN15A This unit punches holes in copies and other output. A finisher or
MX-PN15B saddle stitch finisher (MX-FN28/MX-FN29) is required.
MX-PN15C
MX-PN15D
1-110
Description