Sharp MX-2630N User Manual page 824

SYSTEM SETTINGS►SYSTEM SETTINGS
Display Bcc Address on the Job Status Screen
Displays Bcc addresses on the job status screen and address list tab.
Auto Scan Setting (Only on the MX-3060N/MX-3070N/MX-3560N/MX-3570N/MX-4060N/
MX-4070N/MX-5070N/MX-6070N)
Configure auto scan setting.
Set Image Orientation Automatically
The orientation of placed originals can be automatically detected. Set whether the original is scanned by one-sided
scanning or two-sided scanning.
Set Resolution Automatically
You can have the machine automatically set the resolution.
Blank Page Skip
Set whether or not blank original pages are automatically skipped during scanning.
Disable Scan Function
Specify this to disable remote PC scanning and storing to external memory device.
Preset restriction of E-mail for direct input
Enable this setting to prohibit e-mail transmission to an address that has an unsuitable domain. A file will not be sent if
the e-mail address is entered directly and the domain is one of the set domains.
Default Address
Default Address Setting
A default address can be stored that makes it possible to transmit by simply pressing the [Colour Start] key or the [B/W
Start] key without specifying an address. If [Apply E-mail address of the user for login.] is selected, the E-mail address of
the login user is set as the default destination. When [Apply Home Directory of The User for Login] is selected, the
default address is the home directory of the user that logged in.
When the user logs in by internal authentication (authentication by the machine), the home directory setting of the user
that logged in is configured in "User Registration" in "User List" in "User Control". When the user logs in by external
authentication (network authentication), the home directory setting is configured in "Global Address Book Settings" in
"LDAP Settings" in "Network Settings".
Only a single default address can be set for Scan to E-mail, Scan to FTP, Scan to Desktop, and Scan to Network Folder.
Add Selected
Select an address that is to be used by default.
Apply E-mail address of the user for login.
The E-mail address of the login user is set as the default address.
Select [Allow cancel of the first entered address] based on your intended use.
Apply Home Directory of The User for Login
The home directory of the login user is set as the default address.
Select [Allow cancel of the first entered address] based on your intended use.
Allow cancel of the first entered address
You can cancel the E-mail address of the login user that is entered automatically. To cancel, tap the [x] button next to the
address entry field. When this setting is disabled, selection of an address other than the entered default address is prohibited.
If an e-mail address is not set for the logged-in user, scanner transmission cannot be used.
Select From Address Book
• To display your desired address book, narrow the search by alphabet or category with the list of [Index]. You can
select the number of addresses that are to be displayed at a time with [Display Items].
• When you select the desired address name and tap the [Store] key, the selected address can be selected for the
default address.
7-100