Sharp MX-2630N User Manual page 482

FACSIMILE►OTHERS FUNCTION
3
Others
Erase Dual Page Scan
Card Shot Timer
Own Name Transaction
Select Report
File Quick File
Polling
Back
To cancel the N-Up setting
Tap the [N-Up] key to uncheck it.
Tap the [Original] key.
4
5
Address Fax Number
Address Book
Original
Scan Size
Auto A4
2-Sided
Tablet
2-Sided
Booklet
Others
reception memory
Tap the [Start] key to start scanning of the original.
6
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning and transmission have ended.
• When you place the original on the document glass, scan each page one at a time.
When scanning finishes, place the next original and tap the [Start] key. Repeat the procedure until all pages have
been scanned and then tap the [Read-End] key.
A beep will sound to indicate that scanning and transmission have ended.
• You can tap the [Preview] key to check a preview of the image before sending a fax. For more information, see
"CHECKING THE IMAGE TO BE TRANSMITTED (page
• If you tap the [Change Setting] key on the scan confirmation screen, you can change the exposure, resolution, scan
size, and send size.
(However, when scanning each even-numbered page of the original, only the exposure can be changed.)
Sending History
Call Search Number
Book Divide
Verif.
Direct TX
Stamp
Verification Stamp
Memory Box
Call Program
Call Registered settings
N-Up
Send Same Image
as Fax Address
Preview
Start
A4 A4
Speaker
reception memory 100%
N-Up
Put Multiple Pages in A Page
Slow Scan Mode
Scan Thin Paper Original
Send Size
70%
Auto A4
Image Orientation
Preview
Start
Speaker
0%
Tap the [Others] key, and tap the
[N-Up] key.
A checkmark appears on the icon.
After the settings are completed, tap
CA
Tap the [Image Orientation] key with
the same orientation as the placed
original.
If this setting is not correct, a suitable image may not be
transmitted.
After the settings are completed, tap
CA
4-30)".
4-75
.
.