Staple Settings - Sharp MX-2630N User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES

STAPLE SETTINGS

Specify whether or not the set of output will be stapled.
Original
Orientation
-
Portrait orientation
Landscape orientation
• You can view staple positions on the
of the copy ratio or paper size setting.
• To change the default staple position:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Staple Position].
• An inner finisher, finisher, finisher (large stacker), saddle stitch finisher or saddle stitch finisher (large stacker) is required to
use the staple function.
• A saddle stitch finisher or saddle stitch finisher (large stacker) is required to use the saddle stitch function.
• An inner finisher, finisher (large stacker) or saddle stitch finisher (large stacker) is required to use the stapleless staple.
Staple
OFF Does not staple.
1 Staples
2 Staples
Stapleless Staple
1 Staples
2 Staples
Stapleless Staple
"PREVIEW SCREEN (page
Staple Position
Left
1-17)". Text will be printed at the preset size regardless
2-42
Top Right