Part Names And Function; Exterior - Sharp MX-2630N User Manual

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
BEFORE USING THE MACHINE

PART NAMES AND FUNCTION

EXTERIOR

(1)
MX-2630N/MX-3050N/MX-3060N/
MX-3550N/MX-3560N/MX-4050N/
MX-4060N/MX-5050N/MX-6050N
MX-2630N
(1) Automatic document feeder
It automatically feeds and scans multiple originals. 2-sided
originals can be automatically scanned. For the MX-3070N/
MX-3570N/MX-4070N/MX-5070N/MX-6070N, both sides of
2-sided originals can be automatically scanned at one time.
► AUTOMATIC DOCUMENT FEEDER (page 1-82)
(2) Output tray (exit tray cabinet)
Received faxes and printed papers are delivered to this tray.
(3) Job separator tray (upper tray)
Output is delivered to this tray.
You can also output jobs to the job separator (centre
tray) when a relay unit is installed.
(4) USB port (A type)
This is used to connect a USB device such as a USB
memory device to the machine.
Supports USB 2.0 (Hi-Speed).
(5) Operation panel
This panel hosts the [Power] button, [Power Save]
button/indicator, error indicator, [Home Screen] button, main
power button, data notification indicator and touch panel.
Use the touch panel to operate each of these functions.
► OPERATION PANEL (page 1-8)
*1 Peripheral device.
Equipped standard or not available in some countries and regions. Not available on some models. Contact your dealer or
nearest authorised service representative.
(2) (3) (1)
(5)
*1
*1
1-3
(4) (5) (6)
MX-2630N/MX-3050N/MX-3060N/
MX-3070N/MX-3550N/MX-3560N/
MX-3570N/MX-4050N/MX-4060N/M
X-4070N
(9) (10)
(6) Exit tray unit (right tray)
Set this tray as the output tray if needed.
*1
(7) Keyboard
Use this as a substitute for the soft keyboard displayed
on the touch panel. When not being used, it can be
stored under the operation panel.
*1
(8) Inner finisher
This staples paper. A punch module can also be installed to punch
holes in output paper. You can also perform stapling manually.
► INNER FINISHER (page 1-112)
(9) Toner cover (MX-5050N/MX-5070N/MX-6050N/MX-6070N)
Open to replace a toner cartridge.
► REPLACEMENT OF TONER CARTRIDGE (page 1-155)
(10) Front cover (MX-5050N/MX-5070N/MX-6050N/MX-6070N)
Open to switch the main power switch to "On" or "Off".
► TURNING ON THE POWER (page 1-10)
(11) Front cover (MX-2630N/MX-3050N/MX-3060N/MX-3070N/
MX-3550N/MX-3560N/MX-3570N/MX-4050N/MX-4060N/
MX-4070N)
Open this cover to switch the main power switch to "On"
or "Off" to replace a toner cartridge.
► TURNING ON THE POWER (page 1-10)
► REPLACEMENT OF TONER CARTRIDGE (page 1-155)
(7) (8)
(11)
*1