Sharp MX-2630N User Manual page 185

COPIER►BASIC PROCEDURE FOR MAKING COPIES
4
Original
A4
Paper
2-Sided Copy
Select
A4
Tray 1
CA
Preview
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper tray manually.
Tap the [Preview] key.
5
Tap the [Colour Start] or [B/W Start] key.
6
7
Original
A4
Place next original. Press [Start].
When finished, press [Read-End].
Paper
Select
A4
Tray 1
CA
Tap the [Read-End] key to start copying.
8
Detail
Copy Ratio Staple / Punch
100% Off
1 → 1
Copies
B/W Colour
Start Start
Detail
Staple / Punch
Off
Read-End
Copies
B/W Colour
Start Start
Check the paper (tray) and colour
mode you want to use for copying, and
tap the keys for any other settings you
want to select.
Tap the [Original] key and specify the orientation of the
original to have the orientation be correctly recognized.
► Specifying the orientation of the original (page 2-33)
• Paper Select ►page 2-13
• Copy Ratio ►page 2-26
• Staple / Punch ►page
• Colour Mode ►page 2-20
• Original ►page 2-33
• Exposure ►page 2-23
• N-Up ►page 2-50
• Card Shot ►page 2-54
Set the next original, and tap the
[Colour Start] or [B/W Start] key to
scan the original.
Tap the same key you tapped in step 6.
Repeat this step until all originals have been scanned.
2-19
2-42, ►page 2-45