Setting Scan Settings; Checking The Image To Be Transmitted - Sharp MX-2630N User Manual

Digital full colour multifunctional system

Hide thumbs Also See for MX-2630N:

Table of Contents

SCANNER/INTERNET FAX►TRANSMITTING AN IMAGE

SETTING SCAN SETTINGS AUTOMATICALLY

(Auto Set) (MX-3060N/MX-3070N/MX-3560N/MX-3570N/

MX-4060N/MX-4070N/MX-5070N/MX-6070N only)

To automatically set scan settings appropriate for the original, tap the [Auto Set] key in the base screen of Easy Mode.

E-mail Address

The following functions are set automatically.

• Image Orientation

• Resolution

• Blank Page Skip

Each function setting value/parameter can be changed in setting mode.

• When "Auto Set" is enabled, greyed out functions cannot be enabled.

• When an Internet Fax address is selected, "Auto Set" cannot be enabled.

To change the "Auto Set" setting, use "Settings (administrator)" - [System Settings] → [Image Send Settings] → [Scan

Settings] → [Condition Settings] → [Auto Scan Setting].

CHECKING THE IMAGE TO BE

Check the image that will be sent in the touch panel before transmission.

You can tap the [Preview] key to check a preview of the image before sending an image. As you can adjust the exposure

and resolution to scan the original while checking it in the preview screen, you can send a better quality original to the

destination.

• Depending on the size of the transmission data, part of the preview image may not appear in the preview screen in the touch panel.

• The preview function is not available when the original size is set to Long Size.

Chapters

Table of Contents