Specific Date Operation Settings - Sharp MX-2630N User Manual

SYSTEM SETTINGS►SYSTEM SETTINGS

Specific Date Operation Settings

You can configure a day on which you have high-output printing or want to perform a special operation as the "specific
date" and set a specific energy saving pattern only for that specific date.
The specific date operation is performed on the day configured as the specific date regardless of the setting on Auto
Power-Off transition time (enabled or disabled).
"Specific Date" tab
A period of up to 7 days can be set for Specific Date. Set the specific date, energy saving pattern to be applied, and the
operation that takes place if the specific date falls on a non-work day.
Item
Date Setting
Applied Energy Saving Operation
Operation for Holiday
• If a specific date that is initially specified coincides with the one that is moved because it falls on a holiday, the setting for
the former takes precedence.
• If specific dates of the same dates are configured, they are used in ascending order between 1 and 7 (specific date
numbers).
"Pattern" tab
This tab is used to configure the details of an energy saving pattern.
Item
Energy Save Operation
Change Pattern Name
Pattern to Be Modeled
Add new schedule.
"Holiday" tab
Specify a holiday. The day you specified as the holiday will not be a specific date.
Item
Holiday List
Day of Week
Set Period
Configure the date on which you want to operate the machine with a specific pattern.
Select a day between 1 and 31 in Every Month or from End of Every Month.
Select an energy saving pattern you want to apply.
Use the "Pattern" tab (page 7-167)
Configure how the machine operates if the preset specific date falls on a holiday.
Use the "Holiday" tab (page 7-167)
Select a specific date pattern you want to specify.
Enter a pattern name when you want to change the name of a specific date pattern.
Select a source pattern when you create a pattern using a stored or preset pattern.
Add a schedule.
When you tap this option, the dates and days of the week for the holidays you have set for
two years.
Use this option to specify a holiday using a day of the week.
Use this to specify a holiday using a date.
"Final Registered Time" shows when the holiday that is stored with Set Period was stored.
7-167
Description
to specify the details of the energy saving pattern.
to specify the day as the holiday.
Description
Description