Sharp MX-2630N User Manual page 396

PRINTER►PRINTING WITHOUT THE PRINTER DRIVER
Performing e-mail print
Using your PC's e-mail software, specify the e-mail address of the machine in "Address" and send e-mail attached with
a file to be printed.
Control commands can be entered in the message of the e-mail to specify the number of copies and print format.
Commands are entered in the format "command name = value" as shown in the example to the right.
As an example, the control commands include the following:
Function
Copies
*1
Staple
*2
Punch
Collate
2-sided Print
*3
Account Number
*4
File Format
Paper
Fold
*5
Document Filing
*5
Quick File
Output
B/W Print
Fit Page
Print Glossy
Print Pages
*1 Enabled only when an inner finisher, finisher, finisher (large stacker), saddle stitch finisher or saddle stitch finisher
(large stacker) is installed. "STAPLELESS" is only enabled when an inner finisher,finisher (large stacker) or saddle
stitch finisher (large stacker) that allows stapling without staples is installed.
*2 Enabled only when a punch module is attached to the inner finisher, finisher, finisher (large stacker), saddle stitch
finisher or saddle stitch finisher (large stacker).
*3 Can be omitted except when authentication is by user number.
*4 On the MX-2630N/MX-3050N/MX-3550N/MX-4050N/MX-5050N/MX-6050N, the Direct print expansion kit is required
for DOCX, PPTX, and XLSX files.
*5 Only enabled when either "Document Filing" or "Quick File" is "ON". When both are "ON", this is disabled.
• The mail text must be in a text format. If entered in Rich Text format (HTML), the commands will have no effect.
• If you enter "Config" in the mail text, a list of control commands is returned.
• If nothing is entered in the body text (message) of the e-mail, printing will take place according to the settings configured in
"Settings (administrator)." → [System Settings] → [Printer Settings] → [Initial Status Settings]. If you selected a PS or PCL
file that includes print conditions, the print conditions in the file will be given priority.
• Enter a file type only when you wish to specify the page-description language. Normally there is no need to enter a file type.
COPIES=2
DUPLEX=LEFT
ACCOUNTNUMBER=11111
PAPER=A4
B/W PRINT=ON
Command name
COPIES
STAPLEOPTION
PUNCH
COLLATE
DUPLEX
ACCOUNTNUMBER
LANGUAGE
PAPER
V-FOLD
FILE
FOLDERNAME
QUICKFILE
OUTTRAY
B/W PRINT
FITIMAGETOPAGE
MEDIATYPE
PRINTPAGES
3-87
Values
1 to 9999
NONE, ONE, TWO, SADDLE,
STAPLELESS
OFF, ON
OFF, ON
TOP, LEFT, RIGHT, OFF
Number (5 to 8 digits)
PCL, PCLXL, POSTSCRIPT, PDF,
TIFF, JPG, DOCX, XLSX, PPTX, PNG
Paper that can be used (A4, LETTER,
or others)
OFF, INSIDE, OUTSIDE
OFF, ON
Up to 28 characters
OFF, ON
CENTER, RIGHT, FINISHER
OFF, ON
OFF, ON
GLOSSY
1-2,5,9-