Sharp MX-2630N User Manual page 494

FACSIMILE►OTHERS FUNCTION
Enter the destination fax number.
2
• Entering a destination number using the numeric keys
• Retrieving a destination from an address book
• Using a search number to retrieve a destination
• Retrieving a destination from a global address book
• Using a transmission log to resend
Tap the [Others] key, and tap the [Erase] key.
3
4
Others
Erase
Up
Left Right
Down
Centre
(0 ~ 20)
10
mm
Back
reception memory
Specify the erase edge on the reverse side when erasing edges of one to three sides of Up, Down, Left, and Right on
the front side to scan a 2-sided original.
• If the [Reverse erase position of back face] checkbox is set to
edge on the front side will be erased.
• If the [Reverse erase position of back face] checkbox is set to
will be erased.
Specify the erase width.
5
After the settings are completed, tap
• Tap the numeric value display indicating the margin shift area on the front side or reverse side, and enter the area
using the numeric keys.
• To quickly set the area, first specify a value close to the desired value by the numeric keys, then adjust it with
To cancel the erase setting:
Tap the [Clear] key.
►page 4-14
►page 4-17
►page 4-20
Exposure
Specify Send Exposure
N-Up
Put Multiple Pages in A Page
Clear
Resolution
Change Original Resolution
Outer Frame
Specify Frame+Centre
Reverse erase position of
back face
Outer Frame
(0 ~ 20) CA
Preview
10
mm
Start
Speaker
100%
and [Back] keys in sequence.
4-87
►page 4-13
►page 4-18
Tap the checkbox of the edge that you
wish to erase, and specify the erase
position.
Check that he tapped checkbox is set to
Frame] key is tapped, the [Up], [Down], [Left], and [Right]
checkboxes are set to
key is tapped, all the checkboxes are set to
, the edge in the position opposite to the erased
, the edge in the same position as on the front side
. If the [Specify
. If the [Specify Frame+Centre]
.
.