Sharp MX-2630N User Manual page 638

SCANNER/INTERNET FAX►OTHER FUNCTIONS
Specify the erase width.
6
After the settings are completed, tap
• Tap the numeric value display indicating the margin shift area on the front side or reverse side, and enter the area
using the numeric keys.
• To quickly set the area, first specify a value close to the desired value by the numeric keys, then adjust it with
To cancel the erase setting:
Tap the [Clear] key.
Tap the [Start] key to start scanning of the original.
7
• If you inserted the original pages in the document feeder tray, all pages are scanned.
A beep will sound to indicate that scanning and transmission have ended.
• When you place the original on the document glass, scan each page one at a time.
When scanning finishes, place the next original and tap the [Start] key.
Repeat until all pages have been scanned and then tap the [Read-End] key.
A beep will sound to indicate that transmission has ended.
You can tap the [Preview] key to check a preview of the image before sending an image. For more information, see
"CHECKING THE IMAGE TO BE TRANSMITTED (page
and [Back] keys in sequence.
5-68)".
5-105
.