Table of Contents
Advertisement
AirCheck G2 Wireless Tester
User Manual
: The number of access points the tester hears at your
location.
SSID: Service Set Identifier. The name of the wireless
network.
Networks that the tester has not heard recently are gray
if Gray inaudible access points is enabled (see page 26).
[Hidden]: The network does not broadcast its SSID.
If an SSID shows in square brackets, the tester found the
hidden SSID in packets from other wireless clients. In
AirCheck G2 Manager, these SSIDs show without square
brackets.
802.11: The 802.11 standards that the access points in
the network use:
802.11a: Uses the 5 GHz band.
802.11b: Uses the 2.4 GHz band.
802.11g: Uses the 2.4 GHz band.
802.11n: Can be used in the 2.4 GHz or 5 GHz bands.
802.11ac: Uses the 5 GHz band.
Red bars: The tester received a 802.11d country code
from the access point. The country does not agree with
the country selected in Settings > Set country in the
tester.
: One or more access points use a bonded
channel. Access points that use the 802.11n standard
can bond a channel with an extension channel above
(
) or below it (
This wider channel gives the network higher throughput.
(...): All access points in the network do not use the same
802.11 standard.
Notes: Press
to scroll to the notes field. The tester adds
notes automatically. See page 37. Networks that have
notes are purple.
(...): The network has multiple notes. To see all notes,
highlight the network, then press
Access Point Details screen.
: Sort 1, descending and ascending sequences
: Sort 2, descending and ascending sequences
The larger arrow
arrow
indicates Sort 2.
30
) to make one 40 MHz channel.
twice to go to the
L
Note
indicates Sort 1. The smaller
Hide quick links:
Advertisement
Table of Contents
