Ping A Device Or Application Server - Netscout AirCheck G2 User Manual

AirCheck G2 Wireless Tester
User Manual
On the connection log screen, press
timestamps for each entry in the log. The timestamps are
in seconds.
Figure 20. The Connection Log

Ping a Device or Application Server

You can enter addresses to ping other devices or application
servers (e.g. web servers). This makes sure that other
Note
to scroll to see the

network devices are accessible and measures the response
time.
1 Connect to a network or access point. See page 40.
2 When the connection is completed, press
Select an IP address from the list or enter a new address.
To enter a new address
Select Enter IP address.
a.
 
b. Use

c. Use
value.
d. To save the address, press
Up to 10 ping targets can be configured on the tester.
The ping screen (Figure 21) shows the results of the ping test.
To ping a different address, press
enter a different address.
ffy10.bmp
44
to select a value to change.
to increase or decrease the highlighted
Done.

Note
twice, then select or

Start tests.
