Transfer Files To A Pc - Netscout AirCheck G2 User Manual

AirCheck G2 Wireless Tester
User Manual
The tester makes these types of XML files (default filenames):
DEVICE.XML: This file contains the information shown

when you select Settings > View AirCheck G2
Information.
CURRENT.ACP: This file contains a copy of the current

profile. It also contains changes you made to settings on
the tester since you saved or loaded the profile.
SNXXXXXX.ACS: Session files contain information about

wireless networks. See
a Client, page 55.. AirCheck G2 Manager uses session
files to create session reports.
The text file oui_abbr.txt contains abbreviations for the names
of manufacturers who make interface devices for networks.
The tester uses the abbreviations as prefixes for MAC
addresses.
To load the latest list of vendor prefixes into the tester:
1 Start the latest version of AirCheck G2 Manager on your
PC, then connect the tester to the PC.
2 Select AirCheck G2 > Update Software, then select the
Vendor MAC Prefix File tab.
3 Click Update from file, select the prefix file (oui_abbr.txt),
then click Open.
If there is a newer list on the Fluke Networks website that is
not included in the latest version of AirCheck G2 Manager,
See "Locating an Access Point or
copy the file to the "VendorPrefix" folder under AirCheck G2
Manager (on your PC). Then, do the steps given above to load
the list into the tester.
If you wish to manually add vendor prefixes into the
oui_abbr.txt file, use Microsoft WordPad, and preserve the
tab delimited fields.
Figure 31. oui_abbr.txt File

Transfer Files to a PC

To use AirCheck G2 Manager to look at test sessions or
profiles that are saved on the tester
1 Install the latest version of AirCheck G2 Manager
software on your PC. Start the software.
2 Turn on the tester.
3 Use the USB cable supplied with the tester to connect
the tester to the PC. The AirCheck G2 pane shows
session files that are on the tester.
66
ffy44.bmp