If The Tester Does Not Discover An Access Point - Netscout AirCheck G2 User Manual

AirCheck G2 Wireless Tester
User Manual

If the Tester Does Not Discover an Access Point

In some situations, the tester will not discover an access
point:
The tester cannot hear the access point because you are

too far away.
The access point does not beacon when the tester listens

to the channel that the access point uses.
The tester cannot hear the access point because the

signal cannot go through a wall or some other barrier.
There is too much interference on the channel that the

access point uses. Select Channels to see the
interference from non-802.11 sources on the channel.
38