Where Is An Access Point; What Networks Or Access Points Come Into Range As I Move; How Can I Document My Network And My Test Session; How Can I Erase Everything On My Aircheck G2 - Netscout AirCheck G2 User Manual

AirCheck G2 Wireless Tester
User Manual

Where is an Access Point?

Select Access Points, select one access point, then press Locate on the Access Point Details screen.
See "Locating an Access Point or a Client, page
You may also use the optional external directional antenna to help you find access points faster.
Directional Antenna, page 59.

What Networks or Access Points Come into Range as I Move?

On the Networks screen, tap Sort: and under the Sort Networks/Access Points By: list, select Last Seen. Then, move
through an area. Networks or access points that come into range are added to the top of the list.
Networks and Access Points, page 25.

How Can I Document My Network and My Test Session?

Save the session (See "Saving Test Sessions and Managing Files, page
software to transfer the session file to a PC and make a report.

How Can I Erase Everything on my AirCheck G2?

If you want to erase all settings, session data and profiles from the tester, select Settings, scroll down to Device
Management, and select Device Settings. Then, select Restore Factory Defaults
stored on the AirCheck G2 tester is erased.
55.
See "Restoring Factory Defaults, page 69.
20
63.), and then, use AirCheck G2 Manager
everything that has been saved or
—

See "The External
See "Discovering