Netscout AirCheck G2 User Manual page 43

The connect button shows as "Connect*" if the tester
cannot connect to the highlighted access point. See page
40.
To connect to a secure access point, the tester must have
a profile that includes security credentials. See page 10.
The channel that the tester currently monitors.

The color of the bars shows the status of the country
code for the regulatory domain. See
Thresholds for Test Ratings and Colored Bar Graphs,
page 13.
The number of access points that the tester

hears at your location. This number does not include
virtual access points if Group virtual access points is
selected. See page 26.

Up to 500 access points can be stored in the access point
database on the tester. When the access point icon turns
yellow, this indicates that greater than or equal to 400
access points have been discovered. 

When the icon turns red, this indicates that 500 or more
access points have been discovered and the access point
database is full. Any new access points seen will not be
included in the list.
To see details for an access point, highlight the access point,
then press . See Figure 18.
L
See "Changing the
35
Discovering Networks and Access Points