Package Contents - Netscout AirCheck G2 User Manual

AirCheck G2 Wireless Tester
User Manual

Package Contents

The AirCheck G2 Wireless Tester comes with the accessories
in the list below. If something is damaged or missing, tell the
dealer where you purchased the product.
AirCheck G2 with internal rechargeable battery pack

AC adapter cord

USB cable for connecting the tester to a PC

Carrying case

Quick Start Guide

Compliance Document

Internal Battery Charging and Life
Charge the battery for 3 hours before you use it for the first
time. When the tester is off, the battery charges in
approximately 7 hours. However, you can use the tester
while you charge the battery.
To charge the battery, connect the ac adapter to the Charging
Port, shown in Figure 1
The battery life is approximately 4.5 hours during typical
operation.
The battery icon in the upper-right corner of the screen
visually displays the amount of charge remaining before the
internal battery is completely drained:
The battery is fully or almost fully charged.
The battery life is low. Connect the ac adapter
to the charging port to charge the battery and
to ensure the tester continues to operate.
The ac adapter is connected to the charging
port.
NOTE: The battery will not charge if the internal
temperature of the tester is above 113ºF (45ºC).
4
on page 5.