Changing The Thresholds For Test Ratings And Colored Bar Graphs - Netscout AirCheck G2 User Manual

AirCheck G2 Wireless Tester
User Manual
Changing the Thresholds for Test Ratings and
Colored Bar Graphs
The bar graphs and Pass/
signal strength, noise, Signal to Noise Ratio (SNR), and other
measurements are above or below specified thresholds.
They are represented as red, yellow, or green.
You can adjust the thresholds to meet the requirements of
your network. See Figure 5.
To change thresholds on the tester
1 Touch Settings on the home screen.
2 Select Thresholds.
3 Tap the and buttons to increase or decrease the
measurements that will receive a rating of Pass (green),
Warning (yellow), and Fail (red).
In AutoTest, results that are green or better
that are red and below
and green produce a
Fail ratings show you if the
Pass, results
Fail, and results in between red
Warning.
Figure 5. Thresholds Screen
14