Aircheck G2 Manager Pc Application - Netscout AirCheck G2 User Manual

AirCheck G2 Wireless Tester
User Manual

AirCheck G2 Manager PC Application

To fully utilize all of your tester's capabilities, use the
AirCheck G2 Manager computer application for the following
activities:
Upgrade the AirCheck G2 tester firmware.

View measurement results saved as session files.

Generate reports from session files.

Set up the AirCheck G2 tester configuration.

Password protect network security credentials by setting

up a Secure Organization.
Save network security credentials and configured test

settings to a Profile.
Transfer a profile with saved settings to the tester.

Set up key network devices to Ping and run a TCP Port

Connect test. You should configure security credentials
for the network(s) containing any key devices that you
are pinging.
Download the AirCheck G2 Manager software from Link-Live
at www.link-live.com/downloads.
Figure 4. Session Details in AirCheck G2 Manager
After downloading and installing the application, connect
your AirCheck G2 Wireless Tester to the PC using the supplied
USB cord.
NOTE: USB on-the-go (OTG) cables cannot connect the
AirCheck G2 to a PC.
The AirCheck G2 Manager online Help contains
more instructions for using the application.
10