Netscout AirCheck G2 User Manual page 39

To sort the list in ascending or descending sequence, use
and to highlight a column heading, then press
  
or Sort 1. For example, to quickly find the access
L 
point that has the strongest signal, highlight
top of the column, then press
the access point with the strongest signal at the top of
the list.
To sort in a secondary sequence, highlight a different
column heading, then press
Press Connect to connect to the highlighted
 
network. See page 40.
The connect button shows as "Connect*" if the tester
cannot connect to the highlighted network. See page 40.
The channel the tester currently monitors. The

color of the bars shows the status of the country code
for the regulatory domain. See
Thresholds for Test Ratings and Colored Bar Graphs,
page 13..
at the
or Sort 1. This puts
L 
Sort 2.

See "Changing the
The number of access points the tester hears at

your location. This number does not include virtual
access points if Group virtual access points is selected.
See page 25.

Up to 500 access points can be stored in the access point
database on the tester. When the access point icon turns
yellow, this indicates that greater than or equal to 400
access points have been discovered. 

When the icon turns red, this indicates that 500 or more
access points have been discovered and the access point
database is full. Any new access points seen will not be
included in the list.
To see descriptions of the icons on the Networks screen,

press Legend.

To see details about the access points in a network, use
to highlight a network, then press
31
Discovering Networks and Access Points
See Figure 16.
L
