Netscout AirCheck G2 User Manual page 94

This appendix shows the default settings for the tester. To
restore all default settings and delete all data, select Settings
> Device Management > Device Settings> Restore
factory defaults.
Function
Profile that the tester uses
Auto shutoff
Language
Country
Sound for the AP Locate function
Thresholds for Bar Graphs
Signal Level: Red
Signal Level: Yellow
Appendix B: Default Settings
Default Setting
Default
On
The language that
was selected last
US
On
-85 dBm
-75 dBm
Signal Level: Green
Noise Level: Red
Noise Level: Yellow
Noise Level: Green
Signal-to-Noise Level: Red
Signal-to-Noise Level: Yellow
Signal-to-Noise Level: Green
Network coverage:
802.11 Utilization level: Green
802.11 Utilization level: Yellow
802.11 Utilization level: Red
Non-802.11 Utilization level:
Green
-65 dBm
-65 dBm
-72 dBm
-80 dBm
10 dB
17 dB
25 dB
2 APs
40%
55%
70%
20%