Netscout AirCheck G2 User Manual page 20

AirCheck G2 Wireless Tester
User Manual
To transfer a profile from a PC to the tester
1 Use the Profile Setup in AirCheck G2 Manager to make a
profile.
2 Connect the tester to the PC using the USB cable
supplied.
3 In AirCheck G2 Manager, drag and drop the Organization
or Profile name from the right panel to the left panel to
transfer the profile to the tester.
To load a profile that is in the AirCheck G2 tester
1 From the home screen, tap the Settings
2 Tap Organizations and Profiles.
3 Tap Load, and select a profile name.
4 Tap Apply.
NOTE: If the file is not a valid profile, or if the extension is
not ".ACP", the tester shows the message "Unable to
load selected profile."
5 Enter the password for the profile, if necessary.
NOTE: You only need to enter the password the first time
you load a profile on the tester.
To save the current settings on the tester as a profile
Select Settings
To save the profile with the current name, press Save.

The tester will ask if you want to overwrite the current
profile.
To save the profile with a new name, select Save As and

then New.
The tester saves the profile in the profiles list.
To edit the profile name, select Rename.

NOTE: Organization and Profile names can have a maximum
button.
of 32 characters. The extension must be ".ACP" if you want to
see the profile in AirCheck G2 Manager.
To delete a profile
1 Select Settings > Organizations and Profiles.
2 Select Delete.
3 Select profile you want to delete
4 Touch Apply.
12
> Organizations and Profiles.