Overview Of Functionality: Examining Your Network Health; How Is The Health Of My Network - Netscout AirCheck G2 User Manual

O
VI. VERVIEW OF

How is the Health of My Network?

How is my Wi-Fi Air
Quality?
Are my channels
overloaded with
access points and Wi-Fi
traffic?
Are any of my
channels too noisy?
F
UNCTIONALITY
Select AutoTest. The tester opens the AutoTest screen to show the results of Air Quality,
including 802.11 Channel Utilization, Non-802.11 Channel Utilization, Co-Channel
Interference, and Adjacent Channel Interference.
The 802.11 Channel Utilization results include the top six channels with the most Wi-Fi traffic.
The channel utilization value, along with the rating of
displayed.
The test rating is based on a comparison of the actual value to user settable thresholds.
These thresholds are configured in Settings
The Non-802.11 Channel Utilization results include the top six channels with the most non-
802.11 interference and noise. The channel utilization value along with the rating of Pass,
Warning, or Fail, is displayed. 
NOTE: This feature may not be available in some countries.
The Co-Channel Interference results include the top six channels with the most APs with a
minimum signal strength. The AP count and rating icon are displayed.
The Adjacent Channel Interference results include the top three channels with
needed...]. The AP count and a Pass, Warning, or Fail icon are also displayed for each channel.
See Using AutoTest to Diagnose Your Network Health, on page 25.

Overview of Functionality: Examining your Network Health

: E
XAMINING YOUR
> Profile Settings > Thresholds.
15
N H
ETWORK EALTH
Pass, Warning, or
[description
Fail, is