Netscout AirCheck G2 User Manual page 61

[Hidden]: The network does not broadcast its SSID.
If an SSID shows in square brackets, the tester found the
hidden SSID in packets from other wireless clients. In
AirCheck G2 Manager, these SSIDs show without square
brackets.
: The maximum and minimum client connect rates last

seen by the tester.
: The security status of the access point:

Red open lock: The access point does not have
security enabled.
Yellow closed lock: The access point uses WEP security
protocol.
Green closed lock: The access point uses a security
protocol that is more secure than WEP, for example, WPA
or WPA2.
AP: The name or BSSID of the access point that the client

uses for the network connection.
: Sort 1, descending and ascending sequences

: Sort 2, descending and ascending sequences
To sort the list in ascending or descending sequence, use
and to highlight a column heading, then press
  
or Sort 1. For example, to quickly find the client
L 
that has the strongest signal, highlight
of the column, then press
client with the strongest signal at the top of the list.
To sort in a secondary sequence, highlight a different
column heading, then press
The channel the tester currently monitors. The

color of the bars shows the status of the country code
for the regulatory domain. See
Thresholds for Test Ratings and Colored Bar Graphs,
page 13..
The number of access points the tester hears at

your location. This number does not include virtual
access points if Group virtual access points is selected.
See page 26.
Press Locate to locate the client. See page 55.
 
53
Discovering Clients
at the top
or Sort 1. This puts the
L 
Sort 2.

See "Changing the