Discovering Networks And Access Points - Netscout AirCheck G2 User Manual

AirCheck G2 Wireless Tester
User Manual
D
VIII. ISCOVERING
The Networks list and the Access Points list are populated
with SSIDs that have been discovered by the AirCheck G2
Tester in your location.
NOTE: By default, the tester hears wireless signals on both
the 2.4 GHz (b/g/n) and 5 GHz (a/n/ac) frequency bands. To
change this setting, select Settings > Profile Settings >
802.11 Settings > Bands.
To discover networks or access points
1 From the home screen, select Networks or Access
Points. The tester shows the Networks list (Figure 14) or
Access Points list (Figure 16).
2 To see details about a network or access point, tap its
row in the list.
An SSID is in black text if the network (or access point) is in
range.
An SSID's row background turns gray to indicate that a
network (or access point) has not been heard recently, or is
now out of range (if Gray inaudible access points is enabled
in the Settings).
N
ETWORKS AND
A P
CCESS OINTS
26