Cleaning The Tester; Kit Package Contents - Netscout LinkRunner AT 1000 User Manual

Meets Australia EMC Requirements.

CLASS 1 LASER PRODUCT. DO NOT LOOK

INTO LASER
Warnings
Use only the AC adapter provided to charge the
battery.
To avoid possible electric shock or personal injury,
follow these guidelines:
Do not use this product if it is damaged. Before

using the product, inspect the case. Look for
cracked or missing plastic.
Do not operate the product around explosive

gas, vapor or dust.
No serviceable parts.

Do not try to service.

If this product is used in a manner not specified

by the manufacturer, the protection provided
by the product may be impaired.
 Warning Class 1 Laser Product

With an optional SFP fiber adapter installed, this
product will contain a Class 1 laser. Do not look into
the laser port because this may cause eye injury.
Use the proper terminals and cable for all
connections.

Cleaning the Tester

To clean the display, use a lens cleaner and a soft, lint-free
cloth. To clean the case, use a soft cloth that is moist with
water or a weak soap.
To prevent damage to the display or the case, do not
use solvents or abrasive materials.

Kit Package Contents

For a listing of the contents of your LinkRunner AT package,
see the list that came in the product's box, or see the lists of
models and accessories at
linkrunner; select MODELS & ACCESSORIES at the top of the
page. If something is damaged or missing, contact the place
of purchase immediately.
3
Cautions
Caution
enterprise.netscout.com/