Setup Confirmation Test - Mitsubishi Electric QJ71LP21 Reference Manual

4 SETUP AND PROCEDURES BEFORE STARTING THE OPERATION

4.10.2 Setup confirmation test

4 - 25
The switch settings of the network module can be checked with this test.
The following three types of items can be checked:
1) Control station duplicate check
2) Station number duplicate check
3) Matching between the network number set for the station to which GX
Developer is connected and the network number set with a network
parameter of the host
For example, in the following system, when the Setup confirmation test is conducted
by the GX Developer connected to remote master station, the monitor screen shown
below is displayed and the setting status of each station can be checked.
Station 1 is indicating that there is a duplication in station number settings.
GX Developer
(Parameter settings)
Remote master station
Station Station
No. 0 No. 2
Station Station
No. 1 No. 7
Duplicate error
Not performed on remote I/O network.
Reserved station Reserved station
Station
No. 3
Network No. 1
Station
No. 1
Duplicate error
MELSEC-Q
Station
No. 4
Station
No. 5
4 - 25