Mitsubishi Electric QJ71LP21 Reference Manual page 71

3 SPECIFICATIONS
1)
X0
MOV D0 W0
Remote master station
QCPU
W
Sequence scan
Device
2)
memory
storage
area
Link
refresh
1
1: Set by network refresh parameters.
2: Set by remote master station common parameters.
3: Set by intelligent parameter automatic refresh settings.
3 - 31
(b) For intelligent function module
The following provides an example of how the link device (W) on the CPU
module side is sent to an intelligent function module.
1) Data is sent to the remote master station W0.
2) W0 data is stored in the network module refresh data storage area
(LW) by link refresh.
3) The W0 data in the refresh data storage area (LW) is stored as W0 in
the link data storage area (LW) according to the common parameters.
4) The W0 data in the link data storage area (LW) is stored in the link data
storage area (LW) for the remote I/O network module by link scan.
5) The W0 data in link data storage area (LW) is stored in refresh data
storage area (LW).
6) The W0 data is written to the remote I/O station intelligent function
module buffer memory address 0 by the automatic refresh settings of
the intelligent parameters.
Network module
LW LW
3)
Refresh data Link data
storage area storage area
2 2
Remote I/O station
Network module
LW
4)
Link
scan
5)
Link data
storage area
2
MELSEC-Q
Intelligent
function module
Buffer
memory
LW(W)
Address 0
6)
Refresh data
storage area
2
Automatic
refresh
3
3 - 31