Other Station Information - Mitsubishi Electric QJ71LP21 Reference Manual

8 TROUBLESHOOTING

8.1.2 Other station information

1)
2)
3)
4)
5)
6)
7)
8 - 6
With the other station information, the status of the communication, data link,
parameters, CPU, loop and reserved station status of each station can be checked.
The buttons 3) and 7) can be selected only when diagnosis is executed from the
remote master station.
[Network info.]
This area displays the same information as the host information in Section 8.1.1.
[Other station info.]
"ERR" is displayed for stations for which the following station is detected in each
item: a faulty station, a station in the STOP status, a reserved station, and a
station to which external power is being supplied.
By clicking each item button, the corresponding status of each station is
displayed.
This information is displayed for the number of stations that equals to the "total
number of link stations" set with the network parameters.
1) Communication status of each station (SW0070 to 73)
Displays the status of the baton pass (whether or not the transient
transmission is possible).
• Normal display
• Highlighted display
: Communication normal station or reserved station
: Communication abnormal station (disconnected
status)
MELSEC-Q
8 - 6