Available Device Ranges - Mitsubishi Electric QJ71LP21 Reference Manual

2 SYSTEM CONFIGURATION

2.2.3 Available device ranges

2 - 6
(2) Table 2.4 lists the setting items can be set on a remote I/O module operating as a
remote I/O station (R) and the parameter setting items can be set from GX
Developer.
Table 2.4 Setting Items of Remote I/O Station
Setting item
Network module main module switch
STATION NO.
MODE
Parameter setting
PLC system setting
PLC RAS setting
I/O assignment
Operation setting
Ethernet setting
CC-Link setting
Remote password setting
GX Configurator setting
Initial setting
Auto refresh setting
: Always set,
3 : Refer to "QCPU User's Manual (Functional Explanation: Program Fundamentals)
(SH-080484ENG)".
4 : Refer to "Q Corresponding Ethernet Interface Module User's Manual (Basic) (SH-
080009)". Note that interrupt setting is not available.
5 : Refer to "CC-Link System Master/Local Module User's Manual (SH-080394E)".
Note that interrupt setting is not available.
6 : Refer to the user's manual of the corresponding intelligent function module.
The remote I/O network can use the following ranges of devices inside network
modules.
Device Available Range
LB 0 to 3FFF (16384 points)
H H
LW 0 to 3FFF (16384 points)
H H
LX 0 to 1FFF (8192 points)
H H
LY 0 to 1FFF (8192 points)
H H
0
CPU module B/W
Network module LB/LW
CPU module X/Y
Actual I/O
LX/LY
Network module
Actual I/O
: Default setting,
The device range (excluding that of I/O module
mounted on the host station) should be assigned to
each network module.
1000
H
(4096)
1: Expandable by changing from [PLC parameters] - [Device settings]
MELSEC-Q
Remote I/O station (R)
1 to 64
: Set as needed, : No need to set
Others
—
2000 3000
H H
(8192) (12288)
Extended
: Available device range
Reference
Section 4.2.2
Section 4.2.2
3
3
3
Section 5.1.2
4
5
Section 7.12
6
6
3FFF
H
(16383)
1
2 - 6