Mitsubishi Electric QJ71LP21 Reference Manual page 121

5 PARAMETER SETTINGS
5 - 4
Table 5.2 Remote I/O station PLC parameter setting items
Parameter setting item
PLC system settings
Number of empty slots
Module synchronization settings
PLC RAS settings
Error check
Operational settings
Remote I/O switch settings
Assignment method
Forwarding parameter between devices
I/O assignment
I/O Assignment
Standard setting
: Always set : Default setting exists
Table 5.3 Remote I/O station network parameter setting items
Parameter setting item
Ethernet
CC-Link
: Always set : Default setting exists
Table 5.4 Remote I/O station remote password setting items
Parameter setting item
Password setting
Setting of password effective module
: Always set : Default setting exists
Refer to the intelligent function module user's manual for details about intelligent
function module parameters.
Network station type
Remote I/O station
: Set as needed
Network station type
Remote I/O station
: Set as needed
Network station type
Remote I/O station
: Set as needed
MELSEC-Q
Reference
section
—
Section 5.2.1
—
Section 5.2.1
—
Section 5.2.1
—
Section 5.2.1
: Setting not required
Reference
section
Section 5.2.1
Section 5.2.1
: Setting not required
Reference
section
Section 5.2.1
Section 5.2.1
: Setting not required
5 - 4