Table of Contents
Advertisement
74
GETTING TO KNOW YOUR VEHICLE
Mist
Push upward on the wiper lever to activate a single
wipe to clear off-road mist or spray from a passing
vehicle. As long as the lever is held up, the wipers will
continue to operate.
NOTE:
The mist feature does not activate the washer pump;
therefore, no washer fluid will be sprayed on the wind-
shield. The washer function must be used in order to
spray the windshield with washer fluid.
For information on wiper care and replacement, see
page 298.
REAR WINDOW WIPER/WASHER —
IF EQUIPPED
A rotary switch on the center portion of the windshield
wiper/washer lever controls the operation of the rear
wiper/washer function.
Rotate the switch upward to the first detent
position for intermittent operation and to the
second detent for continuous rear wiper
operation.
Push the wiper lever toward the instrument
panel to activate the rear washer. The
washer pump and wiper will continue to
operate as long as the lever is held.
NOTE:
As a protective measure, the washer will stop if the switch
is held for more than 20 seconds. Once the switch is
released the washer will resume normal operation.
If the rear wiper is operating when the ignition is placed
in the OFF position, the wiper will automatically return
to the parked position. When the vehicle is restarted,
the wiper will resume function at whichever position the
switch is set at.
CLIMATE CONTROLS
The Climate Control system allows you to regulate the tem-
perature, air flow, and direction of air circulating through-
out the vehicle. The controls are located on the touch-
screen and on the instrument panel below the radio.
AUTOMATIC CLIMATE CONTROL
DESCRIPTIONS AND FUNCTIONS
Uconnect 5 NAV With 12.3-inch Display Automatic
Climate Controls
MAX A/C Button
Press and release the MAX A/C button on the
touchscreen to change the current setting to
the coldest output of air. The MAX A/C indica-
tor illuminates when MAX A/C is on. Pressing
the button again will cause the MAX A/C operation to exit.
NOTE:
The MAX A/C button is only available on the touchscreen.
MAX A/C sets the control for maximum cooling perfor-
mance. The button illuminates when MAX A/C is on. In
MAX A/C, the blower level and mode position can be
adjusted to desired user settings. Pressing other set-
tings will cause the MAX A/C to turn off.
A/C Button
Press and release this button on the touch-
screen, or push the button on the faceplate
to change the current setting. The A/C indi-
cator illuminates when A/C is on.
The A/C button allows the operator to manually activate
or deactivate the A/C system. When the A/C system is
turned on, cool dehumidified air will flow through the
outlets into the cabin.
Recirculation Button
Press and release this button on the touch-
screen, or push the button on the faceplate,
to change the system between recirculation
mode and outside air mode. The Recircula-
tion indicator and the A/C indicator illuminate when the
Recirculation button is pressed. Recirculation can be
used when outside conditions, such as smoke, odors,
dust, or high humidity are present. Recirculation can be
used in all modes. Recirculation may be unavailable
(button on the touchscreen greyed out) if conditions
Advertisement
Table of Contents
