Omron R88M-W User Manual page 215

System Design and Installation
Installation and Wiring Precautions
Caution Do not step on or place a heavy object on the product. Doing so may result in injury.
!
Caution Do not cover the inlet or outlet ports and prevent any foreign objects from entering
!
the product. Failure to observe this may result in fire.
Caution Be sure to install the product in the correct direction. Not doing so may result in mal-
!
function.
Caution Provide the specified clearances between the Servo Driver and the control box or
!
other devices. Not doing so may result in fire or malfunction.
Caution Do not apply any strong impact. Doing so may result in malfunction.
!
Caution Be sure to wire correctly and securely. Not doing so may result in motor runaway,
!
injury, or malfunction.
Caution Be sure that all the mounting screws, terminal screws, and cable connector screws
!
are tightened to the torque specified in the relevant manuals. Incorrect tightening
torque may result in malfunction.
Caution Use crimp terminals for wiring. Do not connect bare stranded wires directly to termi-
!
nals. Connection of bare stranded wires may result in burning.
Caution Always use the power supply voltages specified in the this manual. An incorrect volt-
!
age may result in malfunctioning or burning.
Caution Take appropriate measures to ensure that the specified power with the rated voltage
!
and frequency is supplied. Be particularly careful in places where the power supply
is unstable. An incorrect power supply may result in malfunctioning.
Caution Install external breakers and take other safety measures against short-circuiting in
!
external wiring. Insufficient safety measures against short-circuiting may result in
burning.
Caution To avoid damage to the product, take appropriate and sufficient countermeasures
!
when installing systems in the following locations:
S Locations subject to static electricity or other sources of noise.
S Locations subject to strong electromagnetic fields and magnetic fields.
S Locations subject to possible exposure to radiation.
S Locations close to power supply lines.
Caution When connecting the battery, be careful to connect the polarity correctly. Incorrect
!
polarity connections can damage the battery or cause it to explode.
3-2
Chapter 3