Bode 100 Specifications - Omicron Lab Bode 100 User Manual

4.2

Bode 100 specifications

In this section you can find the most important technical data for the Bode 100. This
technical data is valid for Bode 100 R2 (Hardware revision 2). To find out what hardware
revision you use, please check
Technical data can change without notice. You can download a detailed technical data sheet
from the OMICRON Lab website
Table 4-2: Bode 100 specifications
Characteristic
OUTPUT
Voltage range
Frequency range
Wave form
Source impedance
Connector
INPUT CH 1, INPUT CH 2
AC measurement range
Frequency range
Input impedance
Connectors
Input attenuators
Receiver bandwidth
Dynamic Range
Gain Error
Phase Error
PC interface
Universal serial bus
Connector
OMICRON Lab
5.4 Hardware revisions
www.omicron-lab.com
Rating
-30 dBm...13 dBm
7 mVrms...1 Vrms at 50 Ω load
14 mVrms...2 Vrms at high impedance load
1 Hz...50 MHz
sinusoidal
50 Ω
BNC
100 mVrms full scale with 0 dB input attenuation
10 Vrms full scale with 40 dB input attenuation
1 Hz...50 MHz
Selectable via software:
• 50 Ω
• 1 MΩ ±2% || 40...55 pF
BNC
Selectable via software:
0 dB, 10 dB, 20 dB, 30 dB, 40 dB
Selectable via software:
1 Hz, 3 Hz, 10 Hz, 30 Hz, 100 Hz, 300 Hz, 1 kHz,
3 kHz , 5 kHz*
*only Bode 100 R2
> 100 dB (10 Hz receiver bandwidth)
< 0.1 dB (calibrated)
< 0.5 ° (calibrated)
USB 2.0 or higher
USB type B socket
on page 17.
→ Bode 100 → Technical Data
Technical data
11