Working With Cursors And The Cursor Grid - Omicron Lab Bode 100 User Manual

9.4

Working with cursors and the cursor grid

The cursor grid
The cursor grid shows the values of two cursors and the delta between the two cursors.
The cursor grid offers the following interactive functions:
• Switch cursors on and off by clicking on the checkbox besides the cursor name
• Set the cursor frequency by clicking into the frequency field and manually entering a frequency
• Move the cursor to a specific measurement result by entering the desired value in the Trace
column
• You can also enter a delta value and the second cursor will try to find a frequency where the delta
value can be achieved.
If an entered value cannot be found, the following information is shown.
If multiple solutions are present (e.g. more than one zero-crossing and you entered 0 into the cursor
grid), you can right click into the cursor grid and click
the current frequency to right (higher frequency).
Changing the cursor line style
You can modify the cursor line style by right-clicking the colored cursor field and using the context
menu as shown in the following figure.
OMICRON Lab
.
.
Bode Analyzer Suite functions
.
to search the next solution from
.
109