Omicron Lab Bode 100 User Manual page 30

30
Logging:
Log Level:This function allows you to define the severity level of
the events stored in the log-file. Default is Warning.
Do not use the log-levels Verbose or Debug, except if told
by the OMICRON Lab support team.
UDP Logging: allows you to enable event logging via UDP and to
define the used UDP port.
Logging to a file: allows you to enable the logging of events to a
log file and to define the location of the log file on your computer's
hard drive.
Common:
Allows you to enable the device selection in the start up screen and
to change your preference in relation to the Customer Experience
Improvement Program.
Chart:
In this section you can optimize the size of the text fonts and the
thickness of the measurement traces in the exported chart .
Further on, you can enable the inclusion of the chart legend and
the cursor grid. In addition the position of the cursor grid in the
exported chart and the image file format can be defined.
Data:
In this section you can choose the decimal separator and the field
separator for the clipboard export.
Find more information in
to export data on page 92.
In this section you can define several parameters for the CSV-
Export, Excel-Export and Touchstone-Export of the measured
data. These parameters are the default values that will be used for
all future exports you perform.
Find out more in 9.1.3 Exporting measurement data to CSV or
Excel files on page 94.
Here you can choose if comments, the cursor table, the chart
legend or shaped level are included in the report or not.
Additionally, you can choose if you want to use a custom report or
the standard report. Finally you can select if the report should be
opened after its generation and the program that should be used to
display the report.
Detailed information is available in
page 97.
9.1.2 Use the copy to clipboard functions
9.1.5 Generate a PDF report on
OMICRON Lab