Trace 1 (red curve) shows the Magnitude of the inductor's impedance while Trace 2 (blue curve)
shows the phase of the inductor's impedance. The magnitude curve is rising with 20 dB per decade,
this indicates that we are really measuring an inductor. To measure the resistance Rs and inductance
Ls of the inductor simply change the format for Trace 1 and Trace 2 as shown.
To get a better view on the Ls and Rs it is recommended to switch to two diagrams. To do so follow
the instructions described in
9.3.1 Configure the diagrams
on page 101.
62
OMICRON Lab