Table of Contents
Advertisement
5
Introduction
5.1
SPECTANO 100
SPECTANO 100, in conjunction with its accessories or as stand-alone unit, is a
test system for dielectric analysis of solid and liquid materials. It combines the
time-domain and frequency-domain analysis within a wide frequency range from
20 Hz up to 5 kHz in one device and provides an output voltage range from
100 mV to 200 V
dielectric characteristics of liquid and solid materials such as:
•
•
•
SPECTANO 100 can be used for a wide range of different applications:
•
•
•
•
•
•
5.2
Methods
The following list gives a short
The following list gives a short overview of methods and test cell types which can
be used together with
be used together with SPECTANO 100 to analyze dielectric materials. However,
also measureme
also measurements of di
also measurements of dielectric materials or components without electrode
arrangements are pos
arrangements are possible like capacitors or coils.
arrangements a
Solid diele
Solid dielectric m
Solid dielectric materials:
•
•
•
•
Liquid dielectric materials:
•
•
•
. The designated use of SPECTANO 100 is the analysis of
peak
Impedance, capacitance and resistance
Complex permittivity
Loss factor tan
Dielectric analysis of solid and liquid dielectric materials, for example,
polymers, cellulose-based materials, oil, and other insulation materials
Monitoring of polymerization and hardening processes
ization and hardening processe
Analysis of nanocomposites
omposites
Research on dielectrics
ielectrics
Analysis of ceramics
f ceramics
mics
Analysis of thin films
s of thin films
of thin film
s
following list gives a
used together with SPEC
Parallel plate method
Pa
Parallel p
– Con
– Contacting electrode method used with rigid metal electrodes
–
– Contacting electrode method used with rigid metal electrodes and coated
solid test material
– Contacting electrode method used with thin film electrodes
– Non-contacting electrode method (gap occupied by air or liquid, on one or
both sides of the solid test material)
Tube or cylindrical electrode method
Coaxial probe method
Parallel plate method
Tube or cylindrical electrode method
s s
s such as:
wide range of different applicatio
of different a
nd liquid dielectric materials, for
d dielectric materia
d materials, oil, and other insula
rials, oil, and o
n and hardening pr
es
Introduction
alone unit, is a
nit
It combines the
es th
equency range from
cy range from
voltage range from
e range from
NO 100 is the analysis of
the analysis
0
11
Advertisement
Table of Contents
