Omicron Lab Bode 100 User Manual page 31

In the Chart section of the Options Menu you can change the following settings:
Hint: Click
time.
OMICRON Lab
The sections in this unit allow you to optimize the quality and
appearance of the charts displayed in the Bode Analyzer Suite.
Further on, you can select if the axis labels are displayed in
scientific or engineering format.
General:
Here you can select the maximum number of memory traces,
the default memory line pattern (e.g. solid or dashed) as well as
if the deletion of a memory trace needs to be confirmed or not.
Alternating memory trace color mode:
By enabling this mode you can make it easier to find out to which
trace a memory belongs. If activated each memory alternates the
memory color and the color of the trace it belongs to as shown
below:
to switch back to the default settings of all options at any
Bode Analyzer Suite introduction
31