Omicron Lab Bode 100 User Manual page 43

Now start the Bode Analyzer Suite and enter the Transmission / Reflection measurement mode by
clicking on
Before starting the measurement set the Start and Stop frequency to the values shown below:
After setting the Start and Stop frequency the Center frequency as well as the frequency
Span are set automatically. Alternatively you can enter the Span and Center and the Start
and Stop frequency are updated accordingly
Now you are ready to start your first measurement. Simply click
will see a first measurement comparable to the one shown in the figure below.
OMICRON Lab
.
Measurement types and applications
in the home ribbon. As a result you
43