Using The Trace Configuration - Omicron Lab Bode 100 User Manual

9.6

Using the trace configuration

Please also refer to 6.2.2 Trace configuration
The trace configuration box allows you to configure what Bode 100 measures and how the
measurement results are displayed.
The Trace configuration box allows you to perform the following settings:
• Measurement: Configure what measurement the trace performs. Depending on the measurement
mode you can select between Gain, Impedance, Reflection and Admittance.
• Display: Choose if you want to see the measurement result, a math result or only the memory
curves.
• Format: Choose the desired result format how to display the measurement or math result. For
more details on the possible result formats, please refer to
Impedance Result Formats
• Axis limits: Configure the axis limits of the diagrams. Please check out:
scaling on page 106.
• Y-axis scale: Choose either a linear Y-axis or a logarithmic Y-axis. In addition you can set it to
Log(|Y|) to avoid the logarithms of negative numbers.
• Disable or enable the measurement trace by clicking on the check-box besides the trace name
.
• Rename the trace by double-clicking on the trace name.
• Change the trace style (color, line style, trace markers) by right-clicking on the trace header area.
• Collapse the configuration box by clicking on the arrow in the header
114
on page 23.
on page 37.
Gain Result Formats
9.3.3 Optimize the axis
.
on page 36 and
OMICRON Lab