6.2.3 Ribbon controls
The Bode Analyzer Suite ribbons feature the following commands:
Home ribbon
Memory ribbon
OMICRON Lab
•
New: Create a new measurement
•
Open: Open a different measurement file
•
Save: Save the current file
•
Save as: Choose a different file name to save file
•
Export: Export measurement data
•
Report: Create a PDF print-report
A detailed explanation on the single file operations can be found in
9.1 Exporting and saving measurement data or settings
page 92.
•
Continuous: Starts a continuous measurement
•
Single: Performs one single measurement
•
Stop: Stops a running measurement
•
Transmission/Gain: Open the hardware setup used for the gain
measurement
•
Impedance/Reflection: Open the hardware setup used for the
impedance measurement
For more information regarding the hardware setup, please check
out
Hardware setup
.
•
Full-Range: Perform a Full-Range calibration
•
User-Range: Perform a User-Range calibration
For more information regarding the calibration, please check out
8 Calibration
on page 69
Copy the current measurement data to a new or existing memory
trace.
Show all available memory traces in the diagram.
Bode Analyzer Suite introduction
on
25