Options Menu - Omicron Lab Bode 100 User Manual

6.4

Options menu

The Options menu allows you to modify several functions of the Bode Analyzer Suite. You can access
the Options menu by either clicking the
main window or by clicking File → Options.
Figure 6-4: Bode 100 Options menu
In the Common section of the Options Menu you can change the following settings:
OMICRON Lab
icon in the top right corner of the Bode Analyzer Suite's
General:
Default level unit: allows you to change the unit for Bode 100's
source level setting. You can choose dBm, Vpp or Vrms.
dBm defines the power dissipated into 50 Ω load.
Vpp and Vrms are the voltage output levels present when
a 50 Ω load is connected at the output. Due to the
source's output impedance the output voltage will change
depending on the impedance of the connected load. See
more in 9.2 Signal source settings
Cursor resolution: Defines the number of digits behind the
decimal separator for all values shown in the cursor grid.
Bode Analyzer Suite introduction
on page 98.
29