Authorized Devices Mac List (Id=830 - 834); I/Oparameters; I/O#1 Property Parameter Priority (Id=50010); I/O#1 Operand (Id=50011) - Teltonika TMT250 User Manual

Minimum Maximum
value value

7.11.1.9 Authorized devices MAC list (ID=830 - 834)

This parameter allows adding an authorized devices MAC for connection to TMT250.
Minimum Maximum
value value
0 symbols 12 symbols
7.12 I/O parameters
I/O properties are additional data sources which are recorded along with usual GPS data.

7.12.1 I/O#1 property parameter priority (ID=50010)

This parameter defines I/O property priority: 0 – Disabled; 1 – Low; 2 – High; 3 - Panic.
Minimum Maximum
value value
0 3

7.12.2 I/O#1 operand (ID=50011)

This parameter defines when event is sent: 0 – On range exit; 1 – On range entrance; 2 –
Both; 3 – Monitoring; 4 – Hysteresis; 5 – On changes; 6 – On delta change.
Minimum Maximum
value value
0 6
Default value Goes with (depends on)
Authorized devices MAC list
Default value Goes with (depends on)
Security mode (ID=803)
-
External MAC (ID=804)
External name (ID=805)
Connection mode (ID=807)
Default value Goes with (depends on)
I/O#1 operand (ID=50011)I
High level (ID=50012)
I/O#1 Low level (ID=50013)
2
I/O#1 Event only (ID=50014)
I/O#1 averaging length (ID=50015)
I/O#1 send SMS (ID=7000)
I/O#1 SMS text (ID=8000)
Default value Goes with (depends on)
I/O#1 property parameter priority
(ID=50010)I
5
I/O#1 Low level (ID=50013)
I/O#1 Event only (ID=50014)
I/O#1 averaging length (ID=50015)
I/O#1 send SMS (ID=7000)
94
parameters
External PIN (ID=806)
(ID=830 - 834)
parameters
BT Radio (ID=800)
Local name (ID 801)
Local PIN (ID=802)
External PIN (ID=806)
parameters
/O#1
parameters
/O#1 High level
(ID=50012)
Value type
Value type
String
Value type
Uint8
Value type
Uint8