I/O#1 Logic Operand (Id=1164); I/O#1 Averaging Length (Id=1165) - Teltonika FM1110 User Manual

Minimum
value
-2147483647 2147483647
3 – monitoring, 4 – hysteresis, 5 – on changes.
Minimal
value
value is 1.
Minimum
value
are listed in the next table.
Downloaded from www.Manualslib.com
Maximum Recommended
value
8.7.5

I/O#1 logic operand (ID=1164)

Parameter defines when event is sent: 0 – on range exit, 1 – on range entrance, 2 – both,
Maximum Recommended
value
0 4
8.7.6

I/O#1 averaging length (ID=1165)

Parameter defines I/O property sample length to average. If no averaging needed default
Maximum Recommended
value
0 2592000
Other I/O property elements can be configured in same logic. All I/O element parameters
manuals search engine
Goes with (depends on)
value parameters
I/O#1 property parameter (ID=1160)
priority (ID=1161)
I/O#1
0
I/O#1 High level (ID=1162)
I/O#1 logic operand (ID=1164)
I/O#1 averaging length (ID=1165)
Goes with (depends on)
value parameters
I/O#1 property parameter
I/O#1 priority
3
I/O#1 High level (ID=1162)
I/O#1 Low level (ID=1163)
I/O#1 averaging length (ID=1165)
Goes with (depends on)
value parameters
I/O#1 property parameter
I/O#1 priority
1
I/O#1 High level (ID=1162)
I/O#1 Low level (ID=1163)
I/O#1 logic operand (ID=1164)
Value
(ID=1160)
(ID=1161)
(ID=1160)
(ID=1161)
type
S32
Value
type
S8
Value
type
S32
70