Sms Command List; Sms - Teltonika FMB920 User Manual

(are always sent to server if enabled)
Nr. Property Name
1 Ignition
2 Movement
3 Data mode
4 GSM signal
5 Deep sleep
6 GNSS power
7 GNSS PDOP
8 GNSS HDOP
9 External Voltage
10 Speed
11 GSM Cell ID
12 GSM Area Code
13 Active GSM operator
14 Trip odometer
15 Total odometer
16 Cell ID
17 Digital Input 1
18 Analog Input 1
19 Digital output 1
20 Fuel Used GPS
21 Fuel Rate GPS
22 Axis X
23 Axis Y
24 Axis Z

6 SMS COMMAND LIST

All commands are case sensitive. While FMB900 operates in Sleep mode and user tries to
send SMS message it will arrive to FMB900 device, because GSM module is enabled. Only GNSS
module is disabled in sleep mode.
6.1 SMS command list
Table 4 SMS commands
Command
Description
Logic: 0 / 1
Logic: 0 / 1
0 – home on stop, 1 – home on move, 2 –
roaming on stop, 3 – roaming on move, 4 –
unknown on stop, 5 – unknown on move
GSM signal level value in scale 1 – 5
Logic: 0 / 1
States: 0 – short circ., 1 – connected.
Parameter defines if GPS antenna is short circuit.
All the time value will be sent 1. The only
condition to get value 0, then antenna is damaged
and short circuit.
Probability * 10; 0-500
Probability * 10; 0-500
Voltage: mV, 0 – 30 V
Value in km/h, 0 – xxx km/h
GSM base station ID
Location Area code (LAC), it depends on GSM
operator. It provides unique number which
assigned to a set of base GSM stations. Max
value: 65536
Currently used GSM Operator code
Distance between two records: m
Total odometer count: m
GSM base station ID
Logic: 0 / 1
Voltage: mV, 0 – 30 V
Logic: 0 / 1
Fuel used (ml) by GPS
Fuel Consumption by average speed (l/100km)
Accelerometer axis x value
Accelerometer axis y value
Accelerometer axis z value
Description Response
55