Sms/Gprs Command List - Teltonika TMT250 User Manual

6 SMS/GPRS COMMAND LIST

All commands are case sensitive. When user tries to send SMS/GPRS message to TMT250
that operates in Deep Sleep mode, it cannot arrive to TMT250 device because the GSM/GPRS
module is disabled most of the time. TMT250 will receive the SMS/GPRS message when it exits
Deep Sleep mode. If TMT250 is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS
message will arrive to the device.
6.1 SMS/GPRS command list
Table 4. Common SMS/GPRS commands
Command
getinfo
getver
getstatus
getgps
getio
ggps
readio #
cpureset
getparam #
setparam #:#
setparam #:#;#:#;...
flush #,#,#,#,#,#,#
2 GPRS commands require Codec 12 protocol
2
Description
Returns device runtime system information
Returns code version, device IMEI, modem app
version, RTC time, Init time, Uptime and BT MAC
address
Returns modem status information
Returns current GPS data, date and time
Reads out analog input, digital input and output
Returns location information with Google maps link
Returns IO status, # AVL ID
Resets the device
Returns selected parameter value, # param ID
Sets selected parameter value
1.# - first ID value
2.# - New first Parameter Value
3.# - second ID value
4.# - New second Parameter Value
5.# - third ID value
6.# - New third Parameter Value
SMS command is limited to 160 characters
Redirects device to other server
1.# - IMEI
2.# - APN
3.# - LOGIN
4.# - PASS
5.# - IP
6.# - PORT
54
Response
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes