Sms Command List - Teltonika FM1200 User Manual

6 SMS COMMAND LIST

Read chapter 5.11 to know how to construct a proper SMS message and send it to
FM1200 device. All commands are case sensitive. While FM1200 operates in Deep
Sleep mode and user tries to send SMS message it cannot arrive to FM1200 device,
because GSM/GPRS module is disabled most of the time (wake up depends on Send
Period parameter). FM1200 will receive the SMS when it wakes up (exits deep sleep
mode).

6.1 SMS command list

Command
getstatus
getweektime
getops
getcfgtime
getgps
cpureset
resetprof
getver
getinfo
deleterecords
getio
readio #
setdigout ## Y1
Y2
getparam #
setparam # #
getparam 1271 #
setparam 1271 #
<value>
flush #,#,#,#,#,#,#
readops #
Description
Modem Status information
Current device time, Day of Week and amount of
minutes passed since start of week
List of currently available GSM operator
Date and Time of last successful configuration
Current GPS data and time
Reset CPU
Reset all FLASH1 profile configuration to default
profile
Device / Modem / Code version information
Device runtime system information
Delete all records saved on FLASH
Readout digital inputs and outputs
Readout input value according entered ID, # - ID
value
set digital outputs
0 – OFF, 1 – ON
Y1 – timeout for DO1
Y2 – timeout for DO2
Readout parameter value according entered ID.
# - ID value.
Set parameter value according entered ID and
Value.
1.# - ID value.
2.# - New Parameter Value
# values can be 1,2,3.
# is from 0 to 49.
Initiates all data sending to specified target server
1.# - IMEI
2.# - APN
3.# - LOGIN
4.# - PASS
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP)
1 – send first 20 operator codes, 2 – send from 21
Response
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
st
46